ASA TFTP -Cannot allocate memory

Accessing tftp://10.254.254.100/asdm-825-59-k8.bin...!!!!!!!!!!!!!!!!!!!!!!!
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 %Error writing disk0:/asdm-825-59-k8.bin (Cannot allocate memory)

 

解決方式:
1.重啟設備,釋放設備內存

#reload


2.釋放設備內存,暫時關閉以下功能,成功上傳後,再重新開啟這些功能

# configure terminal
(config)# no threat-detection basic-threat
(config)# no threat-detection statistics tcp-intercept
(config)# no threat-detection statistics
(config)# no webvpn
(config)# wr


(config)# copy tftp flash
Address or name of remote host []? 10.254.254.100
Source filename []? asdm-825-59-k8.bin
Destination filename [disk0]? asdm-825-59-k8.bin
Accessing tftp://10.254.254.100/asdm-825-59-k8.bin..!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Writing file disk0:/asa825-59-k8.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
8312832 bytes copied in 70.230 secs (118754 bytes/sec)
(config)# asdm image disk0:/asdm-825-59-k8.bin

(config)# threat-detection basic-threat
(config)# threat-detection statistics tcp-intercept
(config)# threat-detection statistics
(config)# webvpn
(config)# wr

3.ASDM 上傳檔案

 

https://supportforums.cisco.com/discussion/10819326/problem-uploading-new-software-asa

http://www.petenetlive.com/KB/Article/0000787

 

arrow
arrow

    鵝 發表在 痞客邦 留言(0) 人氣()